Home › Swimming Pool and Spa Demolition
Titan Demolition Nashville provides complete pool demolition in Nashville, TN for inground and above ground pools, hot tubs, and spas. We drain, break, remove, and backfill your pool area with proper compaction so you can reclaim your yard safely.
Titan Demolition Nashville provides professional pool demolition throughout Nashville, TN, Tennessee and the surrounding area. Our licensed, insured crew delivers safe, clean, on-time work with a free estimate before anything begins. Call (615) 805-6909 or request your free quote.
Pool Demolition in Nashville Done the Right Way
If you are ready to retire your old pool or spa, Titan Demolition Nashville makes the process straightforward and safe. We handle full and partial pool demolition for properties across Nashville, from older brick homes in Inglewood and East Nashville to newer builds in Mt. Juliet and Nolensville. Our focus is on doing the work cleanly, protecting your home and neighbors, and leaving you with a yard that is ready for its next chapter.
When you call us about pool demolition, we start with a site visit. We look at the age and construction of the pool, access routes for our equipment, nearby structures, slopes in the yard, and where utilities run. In Nashville, many in ground pools were built in the 80s and 90s with gunite or shotcrete shells and thick concrete decks. Others are vinyl liner pools with steel or polymer walls. These details change how we break up and remove the structure and what it will cost.
We also ask how you plan to use the space after demolition. If you want a patio or garage on that spot, you will usually need a full removal so there is no buried concrete that could settle later. If you plan to go back to lawn or a garden, a partial removal with proper perforation and backfill may be acceptable and more economical. We walk you through both options, explain the pros and cons in plain language, and price each approach so you can decide with a clear picture of the tradeoffs.
How Swimming Pool and Spa Demolition Actually Works
For a typical in ground pool in Nashville, the process starts with permitting and utility checks. We contact 811 to locate underground lines, then confirm gas and electrical feeds to pool equipment are safely disconnected and capped by licensed trades. Once everything is cleared, we bring in compact excavators and skid steers sized for your access, which is important in tight West Nashville or Sylvan Park backyards.
In a full pool removal, we break the concrete or gunite shell into manageable pieces, remove steps, benches, and surrounding coping, and haul all solid debris off site to an approved facility. Any rebar or metal from the shell and deck is separated and recycled. For vinyl liner pools, we remove the liner, wall panels, braces, and any fiberglass steps. Spas that are integrated into the pool are demolished at the same time. Standalone hot tubs are drained, disconnected from power, then cut and lifted out.
In a partial removal, we focus on structural relief. We use the excavator to punch large holes through the bottom of the pool shell, usually every few feet, so water can naturally drain through. We typically remove the upper 18 to 24 inches of the shell and any surrounding concrete deck that would interfere with grading. The broken concrete is then compacted in layers at the bottom of the excavation. Whether you choose full or partial removal, we bring in clean structural fill, usually a mix of compactable soil and stone, and place it in thin lifts that we compact repeatedly to reduce future settling.
What Drives Cost and Timeline for Pool Demolition in Nashville
Pool demolition pricing in Nashville is driven by four main factors: access, pool construction, size, and final finish. Backyard access is often the biggest variable. If we can get standard equipment through a double gate in a Bellevue or Hermitage yard, costs are lower and work goes faster. If we have to hand demo portions, protect extensive landscaping, or work around retaining walls on a Green Hills hillside lot, labor and time increase.
Construction type matters too. Thick gunite pools with wide concrete decks take longer to break and load than smaller vinyl liner or fiberglass shells. Integrated spas, raised walls with waterfalls, and heavy flagstone coping all add to the debris volume and machine time. We measure your pool and spa, estimate debris tonnage, and factor in dump fees, which are higher for heavily reinforced concrete.
Your plans for the space also affect cost. A full removal with engineered backfill suitable for future structures costs more than a partial removal intended for lawn or landscaping. If you want us to finish the area with sod, seed, or a basic gravel pad, we can include that. If you are working with a landscape designer or builder, we coordinate so our grading and compaction meet their requirements. Most residential pool demolitions in Nashville take 2 to 5 working days from the first excavator bucket to final grading, assuming the permit is in place and the weather cooperates.
Common Nashville Pool Demolition Challenges and How We Handle Them
Older pools around Nashville often come with surprises. We frequently see undocumented electrical runs for old lighting, abandoned gas lines from heaters, or drainage tied into outdated clay or cast iron pipes. Titan Demolition Nashville treats these as expected issues, not emergencies. We proceed slowly at first, exposing suspected utility routes by hand digging or soft digging before bringing in the excavator, and we coordinate with licensed electricians and plumbers when needed.
Soil and drainage are another local concern. Much of Middle Tennessee sits on clay soils that hold water. If a pool is not properly perforated and backfilled, you can end up with a soft, wet spot in the yard long after the demolition. We address this by creating a clear drainage path in the former pool area, using clean stone in low points when appropriate and ensuring the final grade directs water away from your house and neighboring properties.
Slope and retaining walls are common around hillside neighborhoods and along creek lots. Removing a pool that was built into a slope requires careful planning so we do not undermine a wall or cause erosion. We may step the backfill, install temporary erosion controls, or leave a short portion of an old structural wall in place below grade to support the bank. Throughout the project, we protect fences, driveways, and any nearby structures with plywood and mats so our machines can work without damaging your property.
What You Can Expect From Titan Demolition Nashville
From the first conversation to the final walk through, Titan Demolition Nashville focuses on clear communication and predictable results. After the initial site visit, we send you a detailed written proposal that explains whether it is full or partial pool removal, how we will access the site, what will be hauled away, what type of fill we will use, and how we will finish the surface. There are no vague line items, so you know exactly what is included.
Before work begins, we help you navigate the permitting requirements with Metro Nashville or the appropriate local jurisdiction. We schedule the job so it fits around your family and neighbors as much as possible, for example avoiding early morning starts in dense neighborhoods and planning concrete breaking for mid day when noise is less disruptive. Our crew keeps the site tidy, manages dust with water as needed, and maintains safe access around your home during the project.
At completion, we walk the yard with you, check that drainage flows as planned, and review any areas that might settle slightly as the fill continues to compact. We explain what to watch for over the next few seasons, how soon you can install new landscaping or structures, and we are available to coordinate with your landscaper or builder if you are moving straight into a new project. The goal is simple: you end up with a former pool or spa area that looks like it was always part of the yard, without headaches now or foundation issues later.
